Neff Yacht Sales / Used 35 foot PREDATOR CUSTOM YACHTS Custom Walk Around Sport Fisherman - IT'S A WRAP

    No Image Available



2001 • 35' (10.67 m) • Sport Fisherman
United States • Florida - S.E.

$189,000 USD

Seriously for sale! Now located near NE Boca Raton, Florida.

IT'S A WRAP has finished an update period which included a complete paint job in 2019. Non-skid decks, newer exterior cushions & enclosure, full tower with controls, and engine service.


Vessel Information

Model: Custom Walk Around
Model Year: 2001
Type: MotorBoat
Category: Sport Fisherman
Condition: Used

LOA: 35' (10.67 m)
Beam Feet: 12' (3.66 m)
Draft Feet: 3' (1.02 m)
Engine Info: 420 HP, Twin, Inboard, Diesel, Yanmar
Staterooms: 1

Location: Highland Beach, Florida United States
City: Highland Beach
Region: Florida - S.E.
Country: United States


This 35' walkaround style sportfish is a fishing machine which offers her anglers the benefits of 360 degree mobility on a stable and capable platform. "It's a Wrap" has been rigged by knowledgeable fisherman and has been modified to lower the maintenance factor by eliminating the teak decks and minimizing the varnish, while keeping her custom sportfish boat features. She has great dock appeal and pleasing style lines.

Her helm deck has newer saddle-colored cushions and a starboard side teak helm pod with custom ladderback helm chair. Polycarbonite enclosure is neatly done between the hardtop and the helm deck. Beneath the hardtop there is an aluminum center overhead grab-rail. There is a center entry to the cabin which has a head to the portside and a V-berth forward with Teak and Holly sole. Interior cabinets are satin finished teak with numerous drawers and shelf compartments along the sides of the V-berth. To the starboard side aft is the main electrical panel and a Corian countertop with molded sea rail and a single burner cooktop. Above on the wall is a digital thermostat for the reverse-cycle OceanAir A/C (new unit 2019). The head has a sliding pocket door and has a Corian vanity top with oval stainless steel sink basin and a retractable faucet/shower wand. The cabinets are white with non-skid floor and drain with sump pump beneath. Crown electric head is aft.

Also in the cabin is a Fusion MS-RA70NSX stereo/sat radio unit with JL Audio speakers on the helm deck and Fusion speakers under the gunwales. There is a small video monitor flush mounted above the V-berth (operation unknown). Also a small video switch panel with a couple of cameras mounted on the tower (operation unknown).

Electronics and Navigation

Lift up electronics console with electric actuator motor, also overhead electronics box

Furuno NavNet 3D GPS/Chartplotter/Radar/Recording Depth Sounder

Furuno Sirius Weather module

Furuno open 6' array radar (12kW?)

Airmar 3kW transducer in oil reservoir

Simrad AP20 Autopilot

VEI Display Monitor, can display Depth and/or Radar (source Furuno unit)

ICOM M-504 Vhf radio

ICOM Commander II full function control mic

Ritchie 2" flush mount magnetic compass

Tower Station:

Furuno TZ Touch 9" multi-function display

Simrad AP21 wired remote for autopilot

Standard Horizon Vhf radio

Fishing Equipment and Features

Non-skid decks with aft corner stainless scupper drains

Center transom livewell with cockpit window and new clear Lexan hinged/gasketed top

Full boat white coaming pads except at the livewell

White 4-place rocket launcher with polished stainless stanchion and swivel gimbal center, plus a mounting base in the bow area

Reconditioned Rupp double spreader tower-mounted Outriggers plus Center rigger

Under deck removable fish box with 2-part hatch

One-piece outward opening transom door with keeper latch

Cockpit sink basin with fresh water faucet in cabinet behind helm seat

Saltwater washdown outlet / extra livewell pump (new '19)

Freshwater washdown, second outlet forward under gunwale

10 flush rod holders in forward walk-around gunwales

Small pitch livewell under forward deck beneath Freeman hatch

6 flush rod holders in cockpit gunwales

Electric reel plugs under forward gunwales and one on tower

10 rod holders mounted on aft tower legs and rear truss of hardtop

Hull and Deck Equipment

Varnished teak Ladderback Custom Helm Chair with canvas cover and cushions

Vanished teak helm pod with polished stainless custom boat helm wheel and chrome bezel/glass covered instrument panel

Drink Box under the portside helm deck aft bench seat

Armstrong Dive ladder with receiver mount on transom beneath the door

Gap tower with full control upper helm station, including custom helm wheel with cheater knob, MMC engine control binnacle, trim tabs switch, Garmin touchscreen display, and new canvas cover

Tower seat with backrest and padded belly band and buggy hardtop

Tower helm box has anchor/steaming light beneath

LED running lights in lower hardtop forward corners

Under gunwale 12v rope lighting

Bow top-opening anchor locker with new Danforth Anchor, lead chain, and nylon rode

Forward deckhouse has removable seat cushion

Cockpit sides have opening cabinets below gunwales

Insulated drink box/bait box under center helm deck step

Storage beneath helm deck bench seating

Fiberglass step box

Cockpit has top corner hawse pipes with cleats mounted below, mid-ship and bow cleats are pop-up style, nothing to catch lines on cap top

Cockpit spray rails

All water-level hull side thru hull outlets are bronze mushroom type

Hull bottom has prop pockets with rudders inside those pockets

Entire boat was painted in 2019. Hull paint color is Ice Blue, topsides are Matterhorn white, rub rail has stainless half round strike plate


8 kW Phasor Kubota 3cylinder/NewAge generator

120/240v AC electrical / 12v DC electrical systems

2 x 4D lead-acid Batteries and 1 x Group 24 generator battery (new 9/18)

Rotary battery switches and condition monitor on main electrical panel

Battery galvanic Isolator

ProMarine, Pro-Nautic 12v/40amp battery charger

Yanmar 12v/60amp alternator

50amp shore power cord and inlet

Acme voltage transformer

GCFI protected 110v plug outlets

Helm DC 12v Service sub-panel under console

Tower spreader lights, 2 LED cockpit facing, 1 flood forward facing

Mechanical Equipment

Straight six cylinder, Yanmar 6LP-STE diesels have had an extensive service update including 2 new turbochargers

ZF 280A tranmissions with 1.769:1 reduction and MMC Mircocommander electric engine controls with bright chrome binnacle, MC2000

1 and 3/4" Alloy shafts with dripless shaft logs, a single strut per shaft, and 4-blade Nibral 22"x24" props (recon '19)

Spare set of 3-blade props and Spare set of 4-blade props

Dual Racor primary fuel filters with restriction pressure gauges for main engines

Mechanical Gauges mounted on main engines, oil pressure, coolant temperature

Sea Chest in engine room with all raw water intakes/thru hulls central located

Fireboy Engine room fire suppression tank with auto deploy

Reverso oil change system

Twin Scan gauges at lower helm, Volt meters and Gear oil pressure

Electric fuel gauge, 3 fuel tanks, fuel transfer pump, fiberglass tanks

In helm bezel gauges for oil pressure, coolant temp, and Flo-Scan digital tachs and consumption data

Audible engine alarm and alarm light inside helm console

New raw water pump ('19) for OceanAir A/C

Sureflow fresh water system pump (new '19)

3 auto/manual Bilge pumps

Bennett trim tabs

SeaStar/Teleflex hydraulic steering

Groco saltwater electric toilet with new pump ('19)

Waste holding tank has a deck pump out or macerator with lockout breaker on panel

Broker Comments

IT'S A WRAP has finished an update period which included a complete paint job in 2019. Her motors and generator have had an extensive servicing and general systems have all been looked over.
The original Predator Custom has always been a special vessel admired for her style and features. Here's an opportunity to acquire one of the sporty walk-around models which has benefited from a concentrated update period and is now ready for more adventures.
ere is an original Predator Custom Yachts walk-around built in Sarasota, FL, This vessel is Hull #6 of the eleven hulls made by the original builder before the tooling was sold to Egg Harbor Yachts and production was moved to New Jersey. These original boats were built remarkably strong and lightweight due to their composite sandwich laminate schedule. S-glass, carbon fiber, Kelvar, and epoxy resin were some of the materials utilized in the structure which was heated during the initial lamination process. Only 5 walk-around layout Predators were built (none by Egg Harbor). Powered by 420hp Yanmar diesels, these Florida-built boats were fast, economical, and nimble.


Specifications are provided for informational purposes only. Data was obtained from sources believed reliable but is not guaranteed by owner or brokers. Buyer assumes responsibility to verify all speeds, capacities, consumption's and other measurements contained herein and otherwise provided and agrees to instruct his agents to confirm such details prior to purchase. Vessel is subject to prior sale, price and inventory changes and withdrawal from market without notice.

About Us

So you have made the decision to buy a yacht. Now it's time to make an even bigger decision and choose the right brokerage. Whether you are moving up in size, moving down in size or a first time boat buyer it is important to get the right support. Buying a vessel is a big decision, usually a $100,000 + decision. So having trust and confidence in your yacht broker is key.

Contact Us